H & P Dyes

H & P Dyes

                                    
Yellow P6GS 50 25 L M 80 4 4-5 5 5 3 4 4 4-5 4-5 5 5 Bright Lemon Yellow dye for Greens.
Yellow H4G 130 100 L M 80 5-6 6 4-5 5 1 4R 5 4-5 4-5 5 4-5 Economical basis for Greens & Yellows.
Golden Yellow HR 110 50 M M 80 5-6 6 5 5 3 4-5 5 4G 5 5 5 Important trichromatic component.
Brill Orange H2R 150 100 M M 80 3 4 4-5 5 4W 4 4-5 5 4-5 4-5 4 Orange basis for all shades.
Red PB 150 80 M M 80 3 3-4 4 4-5 3 4 4 4 4 4 4-5 Important trichromatic component.
Red P3B 100 80 M M 80 4 4-5 4 4 4 4 4 4 4-5 4-5 4 Useful as high saturation value dye.
Red H8B 80 10 H L 80 4 4-5 4 4-5 4-5 4 4-5 3 4 4B 4 Important trichromatic component.
Magenta HB 80 40 M L 80 4 4-5 4 5 1 3 5 4-5 4-5 4-5 3 Highly Productive component.
Purple H3R 150 80 M L 80 4 6-7 5 5 4 2-3 5 4-5 5 2-3 4 Bright Purple shade, require prolong fixation time.
Blue HGR 90 60 L M 80 5-6 6 5 5 2D 5 5 5 5 5 5 Typical school Blue shade.
Blue 5RH 120 30 M L 80 5 6 4 4-5 1 1 5 4 4 4-5 4 Important trichromatic component.
Supra Blue H3RP 80 40 L H 80 5 6 5 5 2 3-4 4 5 5 5 5 Royal Blue & Sky Blue shades.
Brill. Turq. Blue H5G 120 80 H H 90 4-5 5-6 4 3-4 3-4G 2 3 4R 2 4-5 3 Can be used for exhaust dyeing also.
Red Brown H4R 90 30 L M 80 4 4-5 4-5 4-5 4-5 5 4-5 3-4 3 4-5 3-4 Highly Productive. Need strong fixation conditions.
Black HN 40 40 L M 80 4-5 6 4-5 5 4 3G 5 4-5 4-5 4-5 3 For gray & other light shades.
Black PGR 60 40 M M 80 - 5-6 4-5 4-5 3 3 4 4 4-5 5 4-5 Useful for Black shade with all round fastness properties.

'H'-dyes application

.Features :.
1.Low reactivity & high temperature application
2.Very good fastness properties
3.Suitable particular for printing.

Exhaust Dyeing : Standard Method :

Minutes Load Machines-Run Liquor and/or fabric.Ensure PH is below 7.
Adjust PH with acetic acid if necessary.Set the dye bath at 50°C.Add pre dissolved dye.
15 Add half of pre dissolved Glauber's salt.Continue dyeing.
15 Add reminder of salt.Continue dyeing.
15 Continue at 30°C.Add predissolved Soda ash solution.
10 Add soda ash solution.Continue dyeing at 80-85°C.
30-60 Continue dyeing at 80-85°C.Wash.

Salt & Alkali Requirement :

Depth of Shade % Salt gms/lt. Soda Ash (gms/lt.)
Up to 0.5 30 10
0.5 - 1.0 45 15
1.0 - 2.0 60 15
2.0 - 4.0 70 20
Above 4.0 90 20

Disclaimer Note :

This Information is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge of Color Wave Industries. The data on this sheet relates only to the specific material designated herein. Color Wave Industries assume no legal responsibility for use or reliance upon these data.